Automatic biochemical analyzer Miura 300
Universal automatic biochemical analyzer of open type with a productivity of 300 analyzes per hour and the ability to connect an ion-selective unit.
A high degree of reliability is a guarantee of comfortable operation of any laboratory
Features:
Principles of measurement: photometry, turbidimetry, dichromatics
Ion-selective unit - integrated (optional) (Na +, K +, Cl-, Li +)
Automatic dilution of samples
Type of measurement: kinetics, end point, fixed time, differentiation
Determining the sequence of tests: automatic optimization or execution in the order specified by the user
Quality control: three-level control, quality, control charts, Levi-Jennings according to the rules of West Guard
Calibration type: 1-point, multi-point, linear and non-linear
Large selection of report forms, archive for 15,000 patients
Optical system:
8 installed light filters with a wavelength from 340 nm to 700 nm (expandable up to 800 nm) plus one free position
Photometric linearity: from 0 to 3 units. OP
Light source: halogen lamps with a service life of 2000 hours
Measuring range: 0 ÷ 3Abs
Resolution: 0.0001 Abs
Optical range: 340-700 nm
Ditches:
Cuvette type - Bionex® material, optical plastic
Number: 80 шт.
Possible reaction volume: 200-500 Jul
Typical reaction volume: 220-260 µl
Optical path length: 6 mm
Possibility of piece replacement of cuvettes
Washing and drying of the ditch is automatic
Benefits:
Productivity - 300 mono-reagent tests per hour (500 tests per hour with ISB)
Open system
Small volume of the reaction mixture
49 positions for reagents and 79 positions for samples (samples, urgent items, standards, control material).
Cooling of reagents and samples on board the analyzer to 14 ° C below ambient temperature (+ 12 ° C ± 12 ° C)
Ability to add urgent samples in the process
Automatic flushing of the ditch on board the analyzer
Built-in barcode scanner for samples and reagents (optional)
Possibility of work with primary test tubes with a diameter of 12-13 mm x 75/100 mm or cups for samples (3 ml)
Number of stations for dosing bottling: 2
Possibility of two-way communication with LIS
Dosing bottling station:
Number of stations for dosing bottling: 2
Number of stations for diluents: 2
Maximum diluent volume: 500µl
Sample volume: 1-300 Jul
Reagent volume: 1-450 µl (step = 1 µl)
Level sensor: capacitive volume sensor
Needle washing: external and internal
Exceeding the reaction mixture
Pre-dilution of the sample: presence in the cuvette
Flushing station:
Number of washing steps - not less than 8
Number of needles (washable / aspirated) - not less than 5
Consumption of system solution - no more than 2.3 l / h
Other:
Intuitive graphical interface, language - English, Russian
Operating system: Windows © 7
Dimensions: 114x75x60 cm
Weight: 79 kg